Pyramix 6.2 SP2 Manual de servicio descargar pdf (Pagina 18)

System Information

2. Follow the on-screen instructions to configure the IP address and netmask of your

Infiniband Interface.

You return to the main menu when you have completed the configuration of the IP address.

3. When you have completed the configuration, exit the InfiniBand configuration utility. Type:

4. You must restart your workstation for your changes to take effect.

Configuring Wire with Infiniband

To allow Wire transfers over an Infiniband network, you must define a new interface of type

PROT=IB_SDP in the [INTERFACE] section of the Wire sw_framestore_map file, as in the

following example:

[FRAMESTORES]

FRAMESTORE=london HADDR=177.20.15.53 ID=30

[INTERFACES]

FRAMESTORE=london

PROT=IB_SDP IADDR=192.16.129.32 DEV=1

PROT=TCP IADDR=177.20.15.53 DEV=1

Make sure that the IP address you assign to the Infiniband interface (that is, the one defined on

the line beginning with PROT=IB_SDP) is not the same as the IP address defined for the host

(that is, the one defined by HADDR=). Doing otherwise would send the house network traffic

through the Infiniband interface and would impair Wire transfers.

OTE

In the [INTERFACES] section, the interfaces are listed in order of preferences. In the example

above, the IB_SDP interface is the preferred one, which means that Wire will attempt to contact

other hosts with this interface first.

Documentation Erratum —

Details about configuring the sw_framestore_map can be found

in the Autodesk Stone & Wire 2007 Filesystem and Networking Guide. On page 41 of this guide,

the sw_framestore_map example provided is currently erroneous, as it assigns the same IP

address to both the Infiniband and the host interfaces.

Infiniband Configuration for Burn

Burn nodes can now be configured with an optional QuickSilver InfiniServ 7000 HCA. The

drivers for this adapter are included in the latest Burn 2007 package, under the /

Burn_2007_SP1_LINUX64_RHEL4/ib directory. This directory also includes a README file

with instructions on how to install the drivers and configure your Infiniband™ interface.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 33 34

Sin comentarios

Pyramix 6.2 SP2 Manual de servicio Pagina 18